ДИЗАЙН ПРЕСТИЖ
Отопление водоснабжение
г. Москва,
Пятницкое шоссе, 55А
РассчитатьПятницкое шоссе, 55А
стоимость работ
125362 г. Москва,
Пятницкое шоссе, 55А
Рассчитать
стоимость
Пятницкое шоссе, 55А
+ 7 (495) 649-57-35
Работаем с Пн-Вс круглосуточно
Статьи
Предлагаем
Наша компания существует с 1999 года.
Цены и прайсы
Отправить заявкуОтопление дома 100 м. кв.
Отопление дома 150 м. кв.
Отопление дома 200 м. кв.
Отопление дома 250 м. кв.
Каталог
О компании
Работаем по всей Московской области и прилегающим областям. Круглосуточно. Проводим Судебные Экспертизы ► ►►
Отопление водоснабжение
- Ремонт отопления
- Ремонт водоснабжения
- Отопление дачи
- Отопление дома
- Котельная дома
- Водоснабжение дома
- Водоснабжение дачи
- Замена отопления
- Газификация
- Ремонт труб
- Котельная
Монтаж установка
- Автономная газификация
- Водоснабжение дома
- Водоснабжение от колодца
- Водоснабжение из скважины
- Водоснабжение дома частное
- Ремонт водоснабжения
- Замена автоматики насоса
- Замена насоса в колодце
- Стоимость замены в колодце
- Зимнее водоснабжение
- Котельная дома
- Автономная котельная
- Переоборудование котельной
- Современная котельная
- Срочный ремонт котельной
- Частная котельная
- Отопление дома
- Автономное отопление
- Водяное отопление
- Воздушное отопление дома
- Газовое отопление
- Дизельное отопление
- Монтаж отопления
- Монтаж газовой котельной
- Отопление
- Отопление дачи
- Отопление дома
- Ремонт отопления
- Замена котла отопления
- Промывка отопления
- Солнечное отопление
- Теплые полы от отопления
- Дровяное отопление
- Замена теплоносителя
Новости компании
- 12.01.2019Разводка в доме может быть выполнена двумя способами
- 12.01.2019Шаг #4 — ставим сливной клапан и реле давления
- 12.01.2019Шаг #2 — теплоизолируем гидроаккумулятор
Все новости компании
Статьи компании
- 8.08.2021Тепло для загородного дома
- 2.08.2021Самотечная система отопления
- 24.07.2021Лучшее отопление дома
Все статьи компании
Наши сметы
- 26.09.2017Отопление ► Одинцовский р-н, деревня Малые Вяземы, СНТ Вязы
- 16.09.2017Отопление ► Московская обл, г. Лобня, ул. Краснополянская
- 5.09.2017Монтаж коммуникаций ► Московская область, Дмитровский р-н, деревня Деденево, ДНП Покровские дали
Все сметы компании
Installation
Largely on the cost of heating affects the complexity of installation. Regardless, installation should only be performed by professionals because it is primarily associated with the safety of people. Electric, gas or diesel equipment must be always properly installed. If this requirement is not met, then during operation there may be irreversible consequences. Even during the installation of conventional radiators and responsibly approach to such processes, especially when the work is carried out in multi-storey buildings. In case of coolant leakage often have to pay damages to the injured party, which is located on the floor below.
Artery heating systems
Currently, there are a wide range of pipelines. They are made from different materials. All heating systems were applied on steel or cast iron pipe. Currently popular polypropylene products. This material has low thermal conductivity, resistance to various chemicals, environmental security, good flexibility, easy during installation. Due to such characteristics of polypropylene created by heating will last a long time on any object. For it soon will need to make repairs.
Modern radiators for rooms
Battery for any heating system are an integral part of it. Not so long ago, almost all buildings used cast iron radiators. Today things have changed, the range of instruments has expanded considerably. Most manufacturers produce panels that are adapted to the climate where they will be applied. Currently manufactured aluminum, copper, iron, steel, bimetal radiators, which are formed depending on the material used for their manufacture, and also from size. In order to choose the right battery for any room, it is necessary to know the area to supply heat. Especially popular now are the aluminum radiators. They have very good heat dissipation and affordable cost for most consumers. In addition, batteries of this type, excellent resist corrosion processes.
One of the modern methods of heating
During the device warm floor pipes are in screed, but they can also be placed in the wall under the top layer of finishing material. In such a situation, it turns out, wall heating which is a different form of space heating. In this embodiment, the heat energy of about 85% is transferred by way of radiation that provides comfort for people, as the temperature will be lower. Also there is no movement of dust. Pipelines of this type of heating are loops for which there is a significant temperature drop occurring on the inlet and outlet. This value reaches 15 degrees. To ensure the best heat transfer. In such a system it is possible to use a circulating pump with lower performance. The pipe in the wall stacked with almost any step. This is valid because of the lack of boundary conditions for the perception of comfort from the heating surface. Most often, the heating in the walls arrange in conjunction with Underfloor heating or when the latter is not enough to reimburse all losses in the room.
Electricity as fuel for boiler
If in a particular district or even on a particular street there is no gas supply in this situation, many private home owners have to decide to install heat-generators solid fuel or electric boilers for heating. Sometimes to install the first option is troublesome and expensive, whereas in the second case, the cost will be low. In addition, these boilers have no source of open flame. Also they do not need to perform the installation of the chimney, as there are no combustion products. This installation consumes less Finance, as well as reduced labor costs. Heat generators of this type during operation is virtually silent and very easily managed. Many modern units efficiency up to 98%. In the heat exchanger they have is the main working element of which is ten. Also electric boilers for heating are equipped with modern power controllers and temperature sensors. These elements greatly simplify their operation.
Autonomous gas heating
Of course, this type of heating is today the most reliable and convenient option. In addition, gas is an economical energy source, and this factor is very important for the majority of the population. Its advantage over other fuels is that it is environmentally friendly and always has high quality. Gas Central heating is highly efficient, especially during use in suburban homes. The equipment for such systems capable of a long time to function smoothly, and its easy to operate. Gas can be used not only in summer but also in winter. Therefore, this type of fuel is very convenient for people. Gas boilers can be delivered by pipeline and in cylinders. The latest version uses special cars that have good traffic and are maneuverable. Currently, the problems of its delivery does not exist. Storage of liquefied hydrocarbons occurs in gas tanks. To lower the pressure to a worker, is applied in such systems the gear. Natural gas, which requires the construction of special piping that is available today not all inhabitants of the country.
The calculation of the required boiler power
Today the market offers a variety of heat sources. In some situations, perfectly suited wall-hung boiler, in other cases you will need to install the outdoor units. To correctly select a heat generator for installation in a private house, you must know its power. Usually such information is available after performing precise calculations by experts, but it is assumed that the heating area is 10 squares, you need 1 kilowatt of energy the boiler. To this value must be added about 25% of the required hot water. The final figure obtained after adding another 20% required for the supply of power to the heat source. Material for the manufacture of boilers can be cast iron or steel. They vary in price and weight. The most affordable to houses and other private houses are wall-hung boiler, which operate from both electricity and gas.
Popular types of heating systems private homes
Suburban property owners are given the opportunity to create an Autonomous scheme to supply heat to their building. Due to her house will be maintained at a comfortable temperature for each room individually. Man can not wait, when will start or will end with an official heating season, as in private buildings installed individual boilers for heating. Their choice depends primarily on the area of the house and type of fuel. Its a certain type may not always be available. Today the most common types of heating systems, depending on the fuel used, are: Газовое. Электрическое. Дизельное. Твердотопливное.
Collector the heating circuit
In such a system each radiator is supplied as a separate supply and return piping. The boiler they are grouped with the help of collectors. Due to this, there is a possibility to lay the whole pipe, which will be no connection. This scheme is relevant during the hidden wiring of engineering communications. Thanks to the creation of such a heating system, the types of which differ in the way of radiator connection, its appearance is more attractive. It is also possible to control the heaters one control Cabinet. When such implementation requires a high consumption of pipe, and also lacks the ability to create a system that will have a natural circulation of water. In addition, it must be equipped with additional devices to improve security.
Two-pipe circuit heating
The main characteristic of this system is the presence of supply and return piping. If the object is created with a dual-pipe scheme of heating, the radiators, the prices of which today depends mainly on the material of manufacture, are connected in parallel. The coolant is heated in the boiler and fed to each device on the supply pipe, so he went back to the heat source, using another tube. During the application of such heating schemes there is a uniform warming all connected radiators, but need to spend more material for a system.
One-pipe circuit heating
In such systems, there is only one pipeline. It connects the boilers for heating and radiators in rooms that are consistently concerning it. At the same time such a pipeline is the supply and return. The coolant passing through each radiator in series, a portion of the heat, while the temperature at the last device will be much lower than the original. To reduce this feature, the systems used a bypass pipe (bypass). It allows part of the coolant to enter the radiator. If the building was designed by the illiterate specialists, the residents on the first floor lack of heat. At the same time, people in the upper levels of the house are exposed to elevated temperatures. When the device of the single-tube system significantly saves material. This is the main advantage of them.
Principal schemes of water movement
Currently, different objects apply the natural and forced circuit for the device of the heating system. The types differ according to the method of circulation of the coolant. So, in the natural scheme of it is moving through pipelines due to the difference of density of hot and cold water. The heated coolant is lighter than cold. Hot water passes through the boiler, as if squeezed out the already cooled liquid. While the device of such a scheme is necessary to observe the required slope for pipelines having a large diameter because it helps reduce the hydraulic resistance. In the forced system there is always a circulation pump. This is the main difference. Its application allows you to create heating in homes when you use pipes, which have a smaller diameter. The pump increases the efficiency of heat emission, but it is not conducive to the lifting of the fluid at any height. Due to it is overcome the hydraulic resistance generated in the pipelines.